View Full Product Catalog


You may need to scroll horizontally to view all table columns.

Grate Type Grate Top Dimension Grate Lower Dimension Grate Height Load Designation Weir Perimeter Lineal Feet Square Feet Open
L 5-11/16 7-3/16 1-1/8 Heavy Duty 2 per ft. 0.2 per ft.
All dimensions are listed in inches unless otherwise noted.


Heavy Duty

Neenah Foundry’s Cast iron Slotted Vane Drain offers ease of installation along with the superior vaned configuration to capture previously unexpected quantities of water when placed perpendicular to the  flow.  Installation is accomplished by sawing a slot in the top of conventional PVC pipe, placing the pipe on grade, installing the Vane Drain in place and pouring concrete.  When used in conjunction with a vane grate inlet, virtually all of the water in the street, which would normally bypass the catch basin the street, is captured.  This permits the spacing between inlets to be increased.  An additional benefit is the added safety factor obtained should the catch basin be plugged or covered with snow.  The unit may also be installed wherever sheet flow capture is required.

On longitudinal sloped of 0% to 6%, this unit captures approximately 0.5 cubic feet per second, per lineal foot

Request a Custom Quote
Request More Information