You may need to scroll horizontally to view all table columns.
|Grate Type||Grate Top Dimension||Grate Lower Dimension||Grate Height||Load Designation||Weir Perimeter Lineal Feet||Square Feet Open|
|L||7-5/8||7-3/16||9||Extra Heavy Duty||2 per ft.||0.2 per ft.|
|All dimensions are listed in inches unless otherwise noted.|
Neenah’s cast iron slotted vane drain offers ease of installation along with the superior vaned configuration to capture previously unexpected quantities of water when placed perpendicular to the flow.
Installation is accomplished by sawing a slot in the top of conventional PVC pipe, placing the pipe on the grade, installing the cast iron slotted vane drain in place, and pouring the concrete. When used in conjunction with a vane grate inlet, virtually all of the surface water which would normally bypass the catch basin, can be captured. This permits the spacing between inlets to be increased.
An additional benefit is the added safety factor obtained should the catch basin be plugged or covered with snow. The unit may also be installed wherever sheet flow capture is required.
Slotted vane drains shown are allowed per FAA advisory circular AC 150/5370-10A Change 11.